Abstract The main purpose of this study was to answer the question: “Can radiotherapy cause changes in the dental pulp condition of patients treated with irradiation in the head and neck region?” Clinical observational studies in adults with head and neck cancer undergoing treatment with ionizing radiation, longitudinal or cross-sectional follow-up to measure oxygen saturation (SpO2), and/or pulp sensitivity test to cold stimulation, were considered eligible. A systematic literature search was performed in six different databases, including the gray literature, and in article references. Two independent evaluators selected the studies, extracted the data, recorded the data on electronic spreadsheets, and then evaluated the methodological quality using the Checklist for Quasi-Experimental Studies tool devised by JBI. The data were assessed qualitatively using the Synthesis Without Metanalysis (SWiM) guidelines. After removing the duplicate articles, carefully analyzing the titles and abstracts, and reading the papers in full, seven studies were included. Four of the studies evaluated applied the cold sensitivity test, two associated pulse oximetry and cold sensitivity, and only one used just pulse oximetry. Evaluation using the cold sensitivity test and pulse oximetry in the initial periods before radiotherapy showed a decrease in the sensitive response and in SpO2 levels during a maximum period of 1 year. However, analyses thereafter indicated a normal response in both tests from 5 to 6 years after the end of radiotherapy treatment. Radiotherapy causes changes in pulp behavior patterns in the short term; however, recovery and return to average values occurs after long periods.

Abstract: This study measured the thickness of cementum/dentin in the danger zone of the mandibular molars after root canal preparation using novel cone-beam computed tomography (CBCT) software. Eighty-four teeth were distributed into four groups: ProTaper Next, BioRace, Reciproc Blue, and WaveOne Gold. E-Vol DX® CBCT software was used to measure initial and final remaining cementum-dentin thicknesses after root canal preparation of the mesial root of mandibular molars at 1 and 3 mm from the furcation. The Kolmogorov-Smirnov test was used to test variable symmetry. The variables were described as mean and standard deviations, compared among the groups using analysis of variance (ANOVA), and within the groups using the Student t test. A generalized estimating equation model was used to compare the variation before and after root canal preparation. The level of significance was set at 5%. Differences between mean initial and final thicknesses of the mesiobuccal (MB) and mesiolingual (ML) canals were not statistically significant. The mean initial thickness was 3 mm (0.900 mm ± 0.191), considering that a mean lower than 1 mm (1.035 mm ± 0.184) indicates the danger zone. Although cementum/dentin is thinner at 3 mm from the furcation (0.715±0.186) after root canal preparation, the greatest amount of dentin removed was found at 1 mm (0.734 ± 0.191). The cementum-dentin remaining after preparation was thicker than 0.715 mm in root canals prepared using #35 (WaveOne Gold®) and #40 (ProTaper Next®, BioRace® and Reciproc Blue®) instruments. This confirms the safety of canal preparation in the danger zone using these systems.

Abstract: Maxillary and mandibular incisors have increased risk for severe orthodontically induced inflammatory root resorption. A patient-related risk factor is aberrant root morphology. This study aimed to assess the frequency of detection of different root morphologies in anterior teeth using dental panoramic tomography (DPT) and long cone periapical radiographs (LCPAs). A retrospective cross-sectional design was used to assess a sample of 50 consecutive pre-treatment radiographic records of patients from a specialist orthodontic practice in Adelaide, Australia. A reference guide was developed that included three previously unreported morphologies: pipette and bent, bent and pointed, bent and blunt. Two trained and calibrated assessors examined each record against the inclusion criteria, then independently assessed each anterior tooth from DPTs and LCPAs to detect the type of root morphology present. Data were analysed using the chi-square statistical test. Radiographic records for 48 patients (48 DPTs and 161 LCPAs) were eligible, with 355 and 426 teeth on DPTs and LCPAs, respectively, included for assessment. Normal root morphology (119 teeth) was commonly observed in DPTs, while bent (154 teeth) was frequently observed using LCPAs. Mandibular incisors often had normal morphology in DPTs but bent in LCPAs. Bent was the most common morphology in maxillary lateral incisors using DPT and LCPAs, although maxillary centrals were mostly normal in DPTs but pointed in LCPAs. Differences using the two image acquisition methods were highly significant (p < 0.01). Aberrant root morphologies are more easily detected in anterior teeth using LCPAs compared to DPTs.

Abstract This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (μCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with μCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and μCT in the assessment of root canal morphology using Vertucci’s classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the μCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as μCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.

Abstract Objective To assess pulp oxygen saturation levels (SaO2) in maxillary central incisors after dental bleaching. Materials and Methods 80 participants (160 teeth) were randomly allocated to four groups: G1 In-office bleaching with two applications of 35% hydrogen peroxide (HP) (20 minutes), followed by at-home bleaching with 10% carbamide peroxide (CP) (2 hours/day for 16 days); G2 - Same protocol as G1, plus desensitizing toothpaste; G3 - In-office bleaching with 35% HP and one application of placebo gel (20 minutes), followed by at-home bleaching with 10% CP (2 hours/day for 16 days); and G4 - Same protocol as G3, plus desensitizing toothpaste. Pulp SaO2 levels were measured before (T0) and immediately after (T1) in-office bleaching; on the 5th (T2), 8th (T3), 12th (T4), and 16th days of at-home bleaching (T5); and on the 7th (T6) and 30th (T7) days. Mean (SD) pulp SaO2 levels were compared within groups by generalized estimating equations (GEE) and Student’s t-test (P<0.05). Results Mean pulp SaO2 at T0 was 84.29% in G1, 84.38% in G2, 84.79% in G3, and 85.83% in G4. At T1, these values decreased to 81.96%, 82.06%, 82.19%, and 81.15% in G1, G2, G3, and G4 respectively, with significant difference in G4 (P<0.05). During home bleaching, pulp SaO2 levels varied in all groups, with 86.55%, 86.60%, 85.71%, and 87.15% means at T7 for G1, G2, G3, and G4, respectively; G2 presented significant difference (P<0.05). Conclusions Pulp SaO2 level in maxillary central incisors was similar at baseline, reducing immediately after in-office bleaching, regardless of using desensitizing toothpaste and increasing at 30 days after dental bleaching.

Abstract: Root perforation results in the communication between root canal walls and periodontal space (external tooth surface). It is commonly caused by an operative procedural accident or pathological alteration (such as extensive dental caries, and external or internal inflammatory root resorption). Different factors may predispose to this communication, such as the presence of pulp stones, calcification, resorptions, tooth malposition (unusual inclination in the arch, tipping or rotation), an extra-coronal restoration or intracanal posts. The diagnosis of dental pulp and/or periapical tissue previous to root perforation is an important predictor of prognosis (including such issues as clinically healthy pulp, inflamed or infected pulp, primary or secondary infection, and presence or absence of intracanal post). Clinical and imaging exams are necessary to identify root perforation. Cone-beam computed tomography constitutes an important resource for the diagnosis and prognosis of this clinical condition. Clinical factors influencing the prognosis and healing of root perforations include its treatment timeline, extent and location. A small root perforation, sealed immediately and apical to the crest bone and epithelial attachment, presents with a better prognosis. The three most widely recommended materials to seal root perforations have been calcium hydroxide, mineral trioxide aggregate and calcium silicate cements. This review aimed to discuss contemporary therapeutic alternatives to treat root canal perforations. Accordingly, the essential aspects for repairing this deleterious tissue injury will be addressed, including its diagnosis, prognosis, and a discussion about the materials actually suggested to seal root canal perforation.

Abstract Multicystic and unicystic ameloblastomas are benign odontogenic tumors that present distinct biological behavior. The investigation of stem cells has become an important branch of tumor biology, with several studies addressing the possible role of these cells in tumor growth, angiogenesis, progression, infiltration and invasiveness. This study evaluated the immunohistochemical expression of CD90(Thy-1) and P75NTR stem cell markers in multicystic and unicystic ameloblastomas. Seventeen (17) samples of ameloblastomas (multicystic, n = 10; unicystic, n = 7) were submitted to immunohistochemical reactions and graded semi-quantitatively. The Kolmogorov-Smirnov test was used to verify possible differences in CD90 and P75NTR expressions between multicystic and unicystic ameloblastomas (p < 0.05). CD90 immunostaining was observed in all multicystic ameloblastoma specimens (n = 10), in the cytoplasm of the fibroblasts and vascular endothelial cells of the tumor stroma, near the neoplastic odontogenic epithelia. The staining of stromal CD90 was significantly higher in multicystic than in unicystic ameloblastomas (p = 0.003). Nuclear P75NTR immunostaining was observed in all ameloblastoma specimens. A significant difference was seen in the epithelial staining of P75NTR between multicystic and unicystic types (p = 0.007). The increased expression of CD90 and P75NTR found in multicystic ameloblastomas suggests a behavioral biological difference between multicystic and unicystic ameloblastomas, as well as a difference in ameloblastoma development.

Objetivo deste estudo foi verificar a influência do Iodofórmio no potencial antimicrobiano do hidróxido de cálcio. S. aureus, E. faecalis, P. aeruginosa, B. subtilis, C. albicans foram os indicadores biológicos. As substâncias testadas foram: hidróxido de cálcio + solução salina; hidróxido de cálcio + iodofórmio + solução salina; iodofórmio + solução salina. Para o teste de difusão em ágar, 18 placas de Petri contendo 20 ml de ágar BHI foram inoculadas com as suspensões microbianas. Cinqüenta e quatro cavidades foram feitas e preenchidas com as substâncias testadas. Os diâmetros da inibição microbiana foram então mensurados. No teste de exposição direta, 162 pontas de papel absorvente número 50 esterilizadas foram imersas nas suspensões experimentais por 5 minutos, e cobertas pelas pastas testadas. Em intervalos de 24, 48 e 72 horas, as pontas de papel foram imersas em 10 ml de Letheen Broth, seguido de incubação a 37°°C por 48 horas. O crescimento microbiano foi avaliado pela turvação do meio de cultura. Um inóculo de 0.1 ml obtido do Letheen Broth foi transferido para 7 ml de BHI, e incubado a 37°°C por 48h. o crescimento bacteriano foi novamente avaliado pela turvação do meio de cultura. As pastas contendo hidróxido de cálcio e solução salina, hidróxido de cálcio-iodofórmio e solução salina mostraram significativa atividade antimicrobiana nos métodos experimentais estudados. A pasta contendo iodofórmio e solução salina foi inefetiva pelo teste de difusão em agar e, também, por exposição direta, para o B. subtilis e a mistura.

The purpose of this research was to verify the influence of Iodoform on antimicrobial potential of calcium hydroxide. S. aureus, E. faecalis, P. aeruginosa, B. subtilis, C. albicans were the biological indicators. The substances tested were: calcium hydroxide + saline; calcium hydroxide + Iodoform + saline; Iodoform + saline. For the agar diffusion test, 18 Petri plates with 20 ml of BHI agar were inoculated with the microbial suspensions. Fifty-four cavities were made and filled with the substances tested. The diameters of microbial inhibition were then measured. In direct exposure test, 162 #50 sterile absorbent paper points were immersed in the experimental suspensions for 5 min, and covered with the pastes. At intervals of 24, 48 and 72 hours, the paper points were immersed in 10 ml of Letheen Broth, followed by incubation at 37°°C for 48h. Microbial growth was evaluated by turbidity of the culture medium. A 0.1 ml inoculum obtained from the Letheen Broth was transferred to 7 ml of BHI, and incubated at 37°°C for 48h. Bacterial growth was again evaluated by turbidity of the culture medium. The calcium hydroxide associated with the saline or the iodoform plus saline showed antimicrobial effectiveness in both experimental methods. The iodoform paste presented antimicrobial ineffectiveness for the agar diffusion test on all biological microorganisms and for the direct exposure test on B. subtilis and on the mixture.

O objetivo do presente estudo foi comparar o efeito antimicrobiano de diferentes pastas obturadoras do canal radicular usadas na Odontopediatria, por dois métodos experimentais. Os materiais testados foram: pasta Guedes Pinto, pasta de óxido de zinco e eugenol, pasta de hidróxido de cálcio, pasta CTZ e Vitapex®, sobre cinco microrganismos (S. aureus, E. faecalis, P. aeruginosa, B. subtilis e C. albicans) obtidos do American Type Culture Collection. As cepas foram inoculadas no Brain Heart Infusion (BHI) e incubadas a 37ºC por 24 h. Para o teste de contato direto, 72 pontas de papel foram contaminadas com suspensões padrão dos microrganismos e expostas às pastas obturadoras por 1, 24, 48 e 72 h. As pontas foram imersas em Letheen Broth (LB), seguido de incubação a 37ºC por 48 h. Um inóculo de 0,1 mL obtido do LB foi transferido para 7 mL de BHI, sobre condições idênticas de incubação e o crescimento microbiano foi avaliado. As pastas mostraram ação entre 1 e 24 h, dependendo da pasta testada. Para o teste de difusão em ágar, 30 placas de Petri com 20 mL de agar BHI foi inoculada com 0,1 mL da suspensão microbiana, utilizando-se de swab esterilizado, semeado de modo confluente no meio. Três cavidades foram feitas em cada placa de ágar (total = 90) e completamente preenchidas com uma das pastas obturadoras. As placas foram pré-incubadas por 1 h em temperatura ambiente e então incubadas a 37ºC por 48 h. As zonas de inibição em torno das cavidades foram mensuradas. O efeito antimicrobiano completo obtido pelas pastas analisadas, por meio do teste por contato direto, foi observado após 24 h em todos os microrganismos. No teste por difusão em ágar, todos os materiais induziram a formação de zonas de inibição, exceto o Vitapex® (variando de 6,0 - 39,0 mm).

The objective of this study was to compare, by two experimental methods, the antimicrobial efficacy of different root canal fillingpastes used in pediatric dentistry. The tested materials were: Guedes-Pinto paste (GPP), zinc oxide-eugenol paste (OZEP), calcium hydroxide paste (CHP), chloramphenicol + tetracycline + zinc oxide and eugenol paste (CTZP) and Vitapex®. Fiven microbial strains (S. aureus, E. faecalis, P. aeruginosa, B. subtilis and C. albicans) obtained from the American Type Culture Collection were inoculated in Brain Heart Infusion (BHI) and incubated at 37ºC for 24 h. For the direct exposure test (DET), 72 paper points were contaminated with the standard microbial suspensions and exposed to the root canal filling pastes for 1, 24, 48 and 72 h. The points were immersed in Letheen Broth (LB), followed by incubation at 37ºC for 48 h. An inoculum of 0.1 mL obtained from LB was then transferred to 7 mL of BHI, under identical incubations conditions and the microbial growth was evaluated. The pastes showed activity between 1 and 24 h, depending on the material. For the agar diffusion test (ADT), 30 Petri plates with 20 mL of BHI agar were inoculated with 0.1 mL of the microbial suspension, using sterile swabs that were spread on the medium. Three cavities were made in each agar plate (total = 90) and completely filled with one of the filling root canal pastes. The plates were pre-incubated for 1 h at room temperature and then incubated at 37ºC for 24 to 48 h. The inhibition zone around each well was recorded in mm. The complete antimicrobial effect in the direct exposure test was observed after 24 h on all microbial indicators. All root canal filling materials induced the formation of inhibition zones, except for Vitapex® (range, 6.0-39.0 mm).

O objetivo deste estudo foi avaliar a capacidade do ozônio associado a três diferentes soluções usadas em um sistema de limpeza ultra-sônica em inativar Staphylococcus aureus. Cento e vinte mL de suspensão com S. aureus foram misturadas em 6 L das soluções experimentais (água destilada esterilizada, vinagre de maça, e água destilada esterilizada + Endozime AWpluz) utilizadas no sistema de limpeza ultra-sônica. O ozônio foi produzido por descarga elétrica através de uma corrente de oxigênio com valor de 7g/h de ozônio (1,2%) dentro das suspensões microbianas. Um total de 10 mL de cada solução experimental foram coletados e realizadas cinco diluições em 9 mL de BHI e incubadas a 37°C por 48 h. O crescimento bacteriano foi avaliado pela turbidade do meio de cultura. Ao mesmo tempo, 1 mL das amostras bacterianas foram coletadas e inoculadas em placas contendo BHIA. Após o período de incubação a 37ºC por 48 h, realizou-se a contagem de unidades formadoras de colônias (ufc/mL). No teste de diluição em tubos com BHI e placas com BHIA (ufc/mL), quando o ozônio foi empregado, o crescimento bacteriano não foi observado em nenhuma das soluções experimentais. Nas condições deste estudo, a aplicação do ozônio nas soluções experimentais presentes no sistema de limpeza ultra-sônica mostrou atividade antibacteriana sobre S. aureus.

The aim of this study was to evaluate the antimicrobial potential of ozone applied to 3 different solutions in an ultrasonic cleaning system against Staphylococcus aureus. A total of 120 mL of S. aureus were mixed in 6 L of the experimental solutions (sterilie distilled water, vinegar and sterile distilled water + Endozime AWpluz) used in a ultrasonic cleaning system (UCS). Ozone was produced by an electric discharge through a current of oxygen and bubbling with flow rate at 7g/h ozone (1.2%) into the microbial suspensions. Ten mL of each experimental suspension were collected and 5 fold dilutions were made in 9 mL of BHI and incubated at 37°C for 48 h. Bacterial growth was evaluated by turbidity of the culture medium. At the same time, 1 mL of bacterial samples was collected and inoculated in BHIA plates. After incubation at 37°C for 48 h, the number of colony forming units (cfu) per mL on BHIA surface was counted. In dilution test in BHI tubes and in BHIA plates (cfu/mL), bacterial growth was not observed in any of the experimental solutions when ozone was added. Under the tested conditions, it may be concluded that the addition of ozone to a ultrasonic cleaning system containing different experimental solutions resulted in antibacterial activity against S. aureus.